Skip to end of banner Go to start of banner

How to send/receive CAN message using PC

Skip to end of metadata

Created by Naoto YAMAGUCHI on May 12, 2024

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Overview

This document describe how to send CAN message to target device/view CAN message receive from target device.

We use DSD Tech SH-C30A and SH-C31A for reference USB-CAN adaptor. Both adapter usage is same, this document mainly focus to SH-C30A.

H/W

SH-C30A

Connect CANH connector to target CANH connector. Connect CANL connector to target CANL connector. Typically, GND connector does not need to target.

R120 switch and Boot Switch set to these.

No labels